Hanley Wood University

 

AIA

  • High Performance Coatings for Cleaner, Fresher Schools (Print Version)

    1 LU

    Without question, school environments take a lot of abuse. A standard architectural coating isn’t formulated to withstand the inevitable scuffs and abrasion that occur in hallways where hundreds of kids pass through every hour five days a week. Metal lockers that get stuffed with books, bags, and sports gear require hard, durable coatings that are tough enough to resist chipping or peeling. Showers and restrooms where damp conditions are the norm need paints formulated with mildewcides to resist the formation of mildew on the surface of the paint film and help maintain a fresh environment. School kitchens and cafeterias are exposed to constant cleaning to maintain proper sanitation standards, so the coatings specified for these areas have to be tough enough to resist harsh cleaning chemicals and detergents. In short, no single coating suits every application, and just as an educational curriculum is designed to meet the needs of students, the coatings you specify must address diverse conditions to perform successfully over time. Take the course.

    Posted:
    June 2014
    Sponsor:
    Sherwin Willilams
    Certification(s):
    AIA
  • Floodproofing Non-Residential Buildings (Print Version)

    1 LU

    Building in floodplains, or Special Flood Hazard Areas (SFHA) designated by FEMA, is strictly regulated by the NFIP, the International Building Code, ASCE national reference standards, and by local community codes, all of which are discussed in this course. Deciding on a non-residential building’s floodproofing strategy will have a direct connection to the project’s cost, to the safety of the building’s occupants and the survivability of the building itself, and to the risk of liability for the designer and builder in case of flood damage. Take the course.

    Posted:
    June 2014
    Sponsor:
    Smart Vent
    Certification(s):
    AIA
  • Learning Can Happen Anywhere (Print Version)

    1 LU

    This course will explore two case studies of replacement schools in the Pacific Northwest – Cherry Crest Elementary and Riverview Elementary. The design of both schools embodies the concept of 21st Century Learning and the idea that learning can happen anywhere. Together, these projects tell a story of sustainability, ecological design and innovation in education architecture. Some schools turn their back on the natural environment. Riverview Elementary and Cherry Crest Elementary do the opposite by interconnecting their buildings to the outdoors. By using design to encourage curiosity about the natural environment, the buildings are part of the educational process – an innovative architectural concept in learning environments. Take the course.

    Posted:
    June 2014
    Sponsor:
    Wilsonart
    Certification(s):
    AIA
  • Building Retrofits: Getting the Whole Picture on Window Replacement (Print Version)

    1 LU HSW

    When undertaking a significant energy retrofit project, architects employ various tools to help them successfully identify potential areas for improvement. Some of the most valuable assets in an architect’s toolbox are companies that provide building analysis. A building analysis service team that can completely test, measure, and document the gaps and opportunities for energy savings in a building will provide the architect with a wealth of information and resources needed to successfully complete the project. However, when it comes to windows, traditional building analysis services often fail to deliver a complete evaluation of the building, and miss several of the key components that can impact energy use. Besides the energy efficiency rating of the window - other consid¬erations like occupant comfort and air tightness should be included when designing a window replacement strategy during a retrofit project. Architects who choose a building analysis service that provides a complete evaluation of the windows and fenestration in the building will have better information, more options, and a greater chance of creating a successful energy efficient design that provides a faster return-on-investment for property owners. Take the course.

    Posted:
    June 2014
    Sponsor:
    Pella
    Certification(s):
    AIA
  • Interior Sliding Door Systems for Single Family, Mid-Rise and High-Rise Buildings

    1 LU

    Sliding doors are not only used for exterior accesses to balconies, decks and courtyards, but are increasingly being specified in residential interior design. This course is going to discuss interior sliding door systems for rooms, closets and utility spaces in single family, mid-rise and high-rise buildings. Interior sliding door system benefits, design options, ADA compliance and installation requirements will be reviewed. Take the course.

    Posted:
    May 2014
    Subject(s):
    Doors
    Sponsor:
    Renin
    Certification(s):
    AIA
  • Solving Moisture Issues with Rapid Drying Concrete

    1 LU

    This course will discuss moisture in concrete slabs and solutions to end slab moisture issues such as flooring failures, mold, warping or curling, and excessive drying times. One solution to these moisture related problems is utilizing a rapid drying concrete. Rapid Drying Concrete is a ready-mix concrete solution for preventing moisture-related floor covering failures, an industry-wide problem that costs millions of dollars annually in damage, downtime, repair and replacement. Take the course.

    Posted:
    April 2014
    Subject(s):
    Structural Concrete, Concrete, Concrete Curing, Concrete Slabs and Floors, Concrete Surfaces, Concrete Construction
    Sponsor:
    US Concrete
    Certification(s):
    AIA
  • Breakthrough Decking: Latest Developments in Wood-Alternatives (Print Version)

    1 LU

    Wood-alternative decking materials have undergone a major transformation since first introduced in the 1990s. But homeowners and even industry professionals are not always aware of these advances. This course examines the wood-alternative decking materials presently available and provides information about the evolution of decking materials, the differences among wood and various alternative decking materials, and the enhanced capability for building design and aesthetics offered by wood-alternative decking. Take the course.

    Posted:
    April 2014
    Subject(s):
    Decking
    Sponsor:
    Trex
    Certification(s):
    AIA
  • Laser Scanning Applications for Architecture (Print Version)

    1 LU

    High definition laser scanning is a non-destructive method for recording a 3D digital image of a building. Its unique ability to precisely record flat and uneven surfaces makes it a valuable tool within the AEC industry. One real advantage of 3D laser scan data is its ability to accurately document variations in surface conditions. When properly scanned in the field, the resulting data will capture every nuance of a building’s surface, such as the variations in surface plane of a rusticated stone wall, or the bulges and tilts in a seemingly flat planar wall or floor surface. As modern design leans towards creating buildings with multiple undulating surfaces and non-planar walls, and century-old ornate masonry buildings begin to deteriorate and shift, 3D laser scanning becomes a needed and effective method to gain accurate documentation for both design and construction. Take the course.

    Posted:
    April 2014
    Subject(s):
    3D Technology
    Sponsor:
    Faro
    Certification(s):
    AIA
  • Designing with Water: Indoor Water Applications Make a New Wave in Architecture

    1 LU

    This course is an introduction to the concept of incorporating indoor water features in a variety of architectural applications. After reviewing the system components and various types of water features, the course will discuss what design considerations factor into a successful installation. It will then take a closer look at two water feature applications in order to appreciate the benefits of partnering with a specialty contractor. Take the course.

    Posted:
    March 2014
    Subject(s):
    Waterfeatures
    Sponsor:
    Bluworld
    Certification(s):
    AIA
  • Multi-Point Locking System

    1 LU

    This course will take a look at what multi-point locks, astragals and multi-point locking astragals are, while highlighting their features. This course addresses the overall benefits of a multi-point locking system and compares them to the traditional systems. Finally, after explaining all of the components, this course will help you decide which hardware to select and specify for your project. Take the course.

    Posted:
    March 2014
    Subject(s):
    Locksets and Hardware
    Sponsor:
    Endura
    Certification(s):
    AIA