The University of Ontario Institute of Technology

Master Plan Site Plan

A Exterior Copper Semple Gooder   Standing-seam copper cladding Can also be used as a roofing product Zinc and prefinished curved metal systems are also available Part of the NOAH building products division Panel systems also available in aluminum and stainless steel B EOS Path lighting Sistemalux Die-cast aluminum housing and trim Lamping options include quad 26-watt fluorescents Housing creates a 10â…ž-inch wide profile and recesses 3¾ inches into the wall 3/4-inch projection from the wall plane Attaches with four visible corner screws

A Brick I-XL Appears in this project as Redflashed smooth from the Redcliff pressed brick division Pressed bricks available in nearly 30 colors, each available in varied facebrick and hollow brick sizes Also available are an extruded/wirecut line and eight different textures B 1600 series curtain wall framing system Kawneer Integrated curtain wall Outside or inside glazing options Condensation water-management capabilities in some systems Pressure-glazed units are suited for low to midrise applications Smooth appearance achieved with concealed fastener joints and fillers that snap into place in open-backed mullions Protected openings meet codes in most regions with wind-borne debris concerns

A Periodical shelving Trend Millwork and Cabinets Custom installation of slatted wood wall divider and periodical shelves Also carry out custom installations with metal and glass detailing on a residential and commercial level B Eglinton lounge chair Keilhauer Legs available in polished aluminum or powder-coat finish Tablet arms available in laminate or wood Frame is made from kiln-dried hardwood, then padded and upholstered in a geometric shape Also available in an armless lounge chair, an ottoman, and two- and three-seater sofas C Tightlock rubber baseboard Johnsonite Tapered ??-inch thickness hides damage to wall board Available in 3 1/4-inch-, 4 1/2-inch-, and 6 1/2-inchhigh faces for carpeted wall applications Comes in 4-foot sections or 75-foot uninterrupted coils for installation in large rooms Inside and outside corner pieces available for a crisp finish

A Sunscreen Modern Railings and Metal Craft Custom aluminum sunshade Company creates custom metalwork for interior and exterior applications Various metal options and finishes B Petite Nuage wall mounted lighting Neo-Ray Lighting   Division of Cooper Lighting Provides three light distributions???direct, indirect, and direct/indirect???by switching direct-lamp component of the fixture Fluorescent source Direct/indirect option gives 35 percent direct light and 65 percent indirect spread Each fixture takes two T8, two T5, or two T5HO lamps Also useful in classroom and multimedia environments

A Pendant light fixtures Lighting Nelson and Garrett Custom pendant fixtures for this space Provide general ambient lighting as well as a design element in the space Company founded by Chris Nelson

A Glass guards Inkan Custom handrails Wood and metal handrail options Available with 1/2-inch-, 5/8-inch-, or 3/4-inch-thick tempered glass Depending on the installation, provides durability and safety Variety of mounting options make for a versatile product

A Recessed downlights with A12AK reflector Lightolier Compact fluorescent source 4-inch to 8 3/4-inch apertures Reflectors to help direct and amplify light output Variety of trim finish options Precise optics to optimize performance in a space Reflectors can be added at time of installation and removed for repair B RWC200 raised access floors Tate ASP Access Floors Each system features standard and heavy duty panels depending on traffic type Systems can leave access for just wire and cable or wire, cable, and air Systems include all steel, wood core, and aluminum, among others Coverings include carpet tile, PosiTile, and HPL with integrated trim C Entropy carpet tiles InterfaceFLOR Protekt soil/stain protection Features 62 percent to 74 percent total recycled content, with 31 percent to 43 percent postindustrial and 31 percent post-consumer 48 available colorways Tiles measure 19.69 inches (50 cm) square Tufted yarn weight is 20 ounces per square yard Pile is 1/5-inch high

A Edwards series chair (now called Eden) Nienkamper Lounge seating series characterized by sharp corners and plush cushion Three arm options: the Boston, the New York, and the San Francisco Seat cushions feature a combination of polyurethane foam, down, and feathers Back cushions are down and feather Pieces can be upholstered in fabric, leather, or a combination of the two Sofa and chair options available

A Heat Mirror TC88 Glazing Southwall Technologies   An insulating glass unit with a thin layer of heat mirror film suspended between two layers of glass Creates a slightly mirrored finish Prevents the majority of the sun’s heat from entering interior spaces, reducing heat gain Blocks UV B Archetype Exterior Lighting Standard KIM LIGHTING Die-cast aluminum housing with a variety of powder coating options Round poles Outdoor cutoff luminaire Available in 70 to 400 watts in the larger model, up to 175 watts in the smaller HID source Multiple sizes allows the fixture to be used throughout a site, from parking to walkway to building entry

Streamline 6010 Series Rebelle Architectural Lighting www.rebellelighting.comThis wall-mounted ceiling washer fixture has a cast aluminum housing with a 4 1/2-inch profile. The source is a metal halide T6 or G12 lamp in 39, 70, or 150 watts. Recessed into the wall is an octagonal junction box and the anchor end of a cantilevered support arm to keep the fixture stable. The source is protected by a 5/32-inch-thick pane of tempered glass, and the fixture is suitable for indoor and outdoor use. Outdoor options are UL listed for wet locations.

Campus KeyA1: Science BuildingA2: Research Laboratory BuildingA3: Business and IT BuildingA6: LibraryA7: Engineering BuildingA9: Automotive Centre of Excellence

Insulclad Doors Kawneerwww.kawneer.comDoors are 2 1/4 inches thick with options for different stile, top, and bottom rail widths depending on the series. Each door has an extruded PVC thermal break and features dual-moment welded corners. Hardware options include surface-mounted or concealed closers, offset pivots, butt hinges, or continuous gear hinges, as well as a variety of push and pull bars. Seven anodized finishes are available, as is paint in standard or custom colors.

Join the Discussion

Please read our Content Guidelines before posting

Close X