Launch Slideshow

The Pin-Fuse Joint slips and rotates under critical seismic forces, allowing a steel structure to roll with the movement of the ground and come back to rest at the optimum point after the earthquake is over, preserving the structural integrity of the building.

Pin-Fuse Joint

Skidmore, Owings & Merrill designs a building frame that rolls with the impact of an earthquake and then returns to form when the aftershocks are finished.

Pin-Fuse Joint

Skidmore, Owings & Merrill designs a building frame that rolls with the impact of an earthquake and then returns to form when the aftershocks are finished.

  • An early sketch shows components of the joint: A plate from the vertical steel member fits into a slot in the horizontal beam and is held in place by brass shims and a pin. Slip-critical bolts will give way and allow the joint to rotate in place during a massive earthquake, allowing the structure to roll with the ground without suffering irreversible damage.

    http://www.architectmagazine.com/Images/tmp116D%2Etmp_tcm20-194086.jpg

    true

    An early sketch shows components of the joint: A plate from the vertical steel member fits into a slot in the horizontal beam and is held in place by brass shims and a pin. Slip-critical bolts will give way and allow the joint to rotate in place during a massive earthquake, allowing the structure to roll with the ground without suffering irreversible damage.

    600

    Courtesy Skidmore, Owings & Merrill

    An early sketch shows components of the joint: A plate from the vertical steel member fits into a slot in the horizontal beam and is held in place by brass shims and a pin. Slip-critical bolts will give way and allow the joint to rotate in place during a massive earthquake, allowing the structure to roll with the ground without suffering irreversible damage.

  • Typical moment frame steel construction

    http://www.architectmagazine.com/Images/tmp116E%2Etmp_tcm20-194093.jpg

    true

    Typical moment frame steel construction

    600

    Courtesy Skidmore, Owings & Merrill

    Typical moment frame steel construction

  • Moment frame during an earthquake

    http://www.architectmagazine.com/Images/tmp116F%2Etmp_tcm20-194100.jpg

    true

    Moment frame during an earthquake

    600

    Courtesy Skidmore, Owings & Merrill

    Moment frame during an earthquake

  • Moment frame during an earthquake

    http://www.architectmagazine.com/Images/tmp1170%2Etmp_tcm20-194107.jpg

    true

    Moment frame during an earthquake

    600

    Courtesy Skidmore, Owings & Merrill

    Moment frame during an earthquake

  • Permanent plastic malformations after the shaking has stopped

    http://www.architectmagazine.com/Images/tmp1171%2Etmp_tcm20-194114.jpg

    true

    Permanent plastic malformations after the shaking has stopped

    600

    Courtesy Skidmore, Owings & Merrill

    Permanent plastic malformations after the shaking has stopped

  • Steel construction with Pin-Fuse Joint

    http://www.architectmagazine.com/Images/tmp1172%2Etmp_tcm20-194121.jpg

    true

    Steel construction with Pin-Fuse Joint

    600

    Courtesy Skidmore, Owings & Merrill

    Steel construction with Pin-Fuse Joint

  • Pin-Fuse Joint during an earthquake

    http://www.architectmagazine.com/Images/tmp1173%2Etmp_tcm20-194128.jpg

    true

    Pin-Fuse Joint during an earthquake

    600

    Courtesy Skidmore, Owings & Merrill

    Pin-Fuse Joint during an earthquake

  • Pin-Fuse Joint during an earthquake

    http://www.architectmagazine.com/Images/tmp1174%2Etmp_tcm20-194135.jpg

    true

    Pin-Fuse Joint during an earthquake

    600

    Courtesy Skidmore, Owings & Merrill

    Pin-Fuse Joint during an earthquake

  • Pin-Fuse Joint steel construction at rest after shaking stops

    http://www.architectmagazine.com/Images/tmp1175%2Etmp_tcm20-194142.jpg

    true

    Pin-Fuse Joint steel construction at rest after shaking stops

    600

    Courtesy Skidmore, Owings & Merrill

    Pin-Fuse Joint steel construction at rest after shaking stops

  • The Pin-Fuse Joint slips and rotates under critical seismic forces, allowing a steel structure to roll with the movement of the ground and come back to rest at the optimum point after the earthquake is over, preserving the structural integrity of the building.

    http://www.architectmagazine.com/Images/tmp1176%2Etmp_tcm20-194149.jpg

    true

    The Pin-Fuse Joint slips and rotates under critical seismic forces, allowing a steel structure to roll with the movement of the ground and come back to rest at the optimum point after the earthquake is over, preserving the structural integrity of the building.

    600

    Courtesy Skidmore, Owings & Merrill

    The Pin-Fuse Joint slips and rotates under critical seismic forces, allowing a steel structure to roll with the movement of the ground and come back to rest at the optimum point after the earthquake is over, preserving the structural integrity of the building.

Anyone who has been in an earthquake appreciates the life-saving protection of a steel-framed building. With the Pin-Fuse Joint, Skidmore, Owings & Merrill’s San Francisco office has devised a way for steel structures to ride out a quake that not only keeps the inhabitants secure, but preserves the integrity of the building structure when the aftershocks wear off.

With typical steel construction, beams are welded to columns in perpendicular moment connections, creating a strong grid that will keep a building stable. But during a major seismic event, when moment connections are subjected to too much force, they can crack or permanently malform in a way that cannot be corrected, and the building must be demolished or undergo extensive and expensive repair work.

The Pin-Fuse Joint is installed on the horizontal members at the moment connection; it consists of a circular-plated end connection with slip-critical friction bolts connecting the curved steel end plates. A steel pin in the center of the horizontal beam provides a rotation point. Under normal circumstances, movement from occupants or lateral forces from wind will not move the connection because it cannot overcome the friction of the end plates. But during a seismic event, when the forces reach a critical point, the joint pivots, allowing the steel frame to roll or jolt with the motion of the quake. When the shaking is done, the frame finds its natural center and slips back into place, as though nothing happened.

The jury was taken with the joint both as an object and as a concept. “I thought this was very clever, and beautiful too,” John Ronan said. “It’s the kind of thing you would want to expose.” And for Los Angeles–based Craig Hodgetts, the project hit close to home. “I think it’s a terrific thing. That deformation is a huge problem in the San Francisco area and in L.A. to a lesser extent—and this does address it from an engineering point of view.” What the jury did worry about, however, was the price point, which was not explicitly stated in the submission. “It looks really expensive,” Hodgetts said. “But there might be a way to streamline this design and make it affordable at some point.”


  • Mark Sarkisian
    Mark Sarkisian

Pin-Fuse Joint

Engineers Skidmore, Owings & Merrill, San Francisco—Mark Sarkisian (structural engineering director); Shea Bond, Jean-Pierre Chakar, Rupa Garai, Eric Long, Neville Mathias, Jun Racines (structural team members); Stanford University, Stanford, Calif.—Gregory Deierlein (collaborating team member)

2009 R+D Awards

  • Light is also directed by the curved shape of the fixture's housing, one of the object's distinctive aesthetic features.

    LED Streetlight

    The Office for Visual Interaction designed a prototype LED streetlight for New York to cut down on energy use.

     
  • The design for the staircase is centered on folded stainless steel. Hung from a structural steel support on the top level of the townhouse, vertical folded pieces create a continuous screen that encloses the two above-grade flights of stairs. Tabs on the bent risers are fitted into slots on the vertical pieces, which created an easy setup for on-site construction and spot-welding.

    Dynamic Descent

    Dean/Wolf Architects designs a folded stainless steel staircase for a Manhattan townhouse.

     
  • A mock-up of the SFIS with bundled plastic bottles. Most plastic water bottles are discarded with the caps on; capped, empty bottles are airtight and can be placed within a concrete structure to create a void. Hydrostatic pressure from wet concrete will only nominally reduce the air volume inside the bottles.

    Sustainable Form-Inclusion System

    Skidmore, Owings & Merrill design a prototype system that uses plastic bottles, bags, and other compressed waste to lighten and fill spaces in concrete slabs.