This story was originally published in Architectural Lighting.

Portal Exit, Hess America The Portal Exit bollard, part of the Portal family of exterior luminaires, provides visual guidance to exits and paths of egress where wall- or ceiling-mounting is not an option. It can be used for myriad applications including rooftop gardens, outdoor entertainment spaces, and swimming pool decks. UL924-compliant for exit signage, the bollard is available with either green or red lettering and consumes just 9W of power. Made of an extruded aluminum housing, the bollard measures 39.4" tall by 12" wide by 3" deep and conceals the LED driver in a weatherproof enclosure. Standard finishes are finely textured matte silver gray metallic, graphite gray, or dark gray. Optional RAL finishes are also available.

EZ Exits, Fulham This emergency LED lighting solution is designed to be installed into typical T-Grid ceiling systems. Sold as a kit, EZ Exits are comprised of two components: an LED light bar—available in either a 2' or 4' length—and a HotSpot Constant Power emergency driver. From below, it appears that the light bar is part of the ceiling grid, but when power goes out, the light bar illuminates, powered by a Ni-Cd battery. The system provides up to 90 minutes of emergency power and 2,500 lumens. Operates on 120V to 277V AC power.

OPTOTRONIC Programmable Emergency LED Driver, Osram This emergency LED driver is part of a family of dual solution programmable drivers that combine emergency and normal mode functions in a single unit. If there is an AC power loss, the driver switches to its emergency mode, in less than two seconds, via externally connected battery packs. The driver can be programmed to meet one foot-candle exit lighting requirements and provides up to 18W in backup mode. Runs on 120V to 270V AC power.

To read more stories like this, visit Architectural Lighting.

More about Fulham
Find products, contact information and articles about Fulham